Category Archives: KODA Headphones

KODA^2 – Optimizing the prototype

The KODA^2 – Optimizing the prototype   Since I made the prototype – I have done some optimizing of the design. It still looks the same on the outsize – but inside has been optimized with the correct sized bass port and 20% less material in overall. This makes them lighter and gives them just the right bass port directly from the laser cutting process. I feel that the weight of the KODA^1 is their only real downside and the new optimized design should issue this and make them below…

KODA^1 – Koenig’s Ortho Dynamic Acrylic Headphone

KODA^1 – The Prototype model  After following the ortho dynamic round-up thread on head-fi.com I got interested in making my own custom cans. I knew right away that the T50RP driver was just what I needed for my custom headphone project. A driver capable of delivering an extraordinary detailed midrange – with potential for delivering a fast and tight oomph in the bass region while maintaining detailed highs, without emphasizing  them too much. Remember to read about the  KODA^1 successor:  THE KODA^2 – Optimizing the Prototype  About the material Having worked quite…